2006 Honda S2000 2006 Honda S2000 Photos 2006 Honda S2000 Wallpapers
2006 Honda S2000 Pics Honda S2000 Photos 2006 Honda S2000 Reviews
s2000-7 s2000-8 s2000-9

2006 HONDA S2000 - Photos, Wallpapers, Reviews, Pics, Articles, Pricing


WHAT HONDA HAS TO SAY ABOUT THIS CAR:

Source: Honda

The S2000 powertrain uses a front-engine/ rear-wheel-drive layout. The longitudinally mounted engine is mated to a 6-speed, close-ratio manual transmission. A propeller shaft carries the output of the transmission to a frame-mounted limited-slip differential. The differential drives the rear wheels via separate axle shafts.

The 2.0-liter, aluminum-alloy, inline 4-cylinder S2000 engine produces 240 hp @ 8300 rpm and 153 lb.-ft. of

torque @ 7500 rpm. The cylinder head is also made of aluminum alloy and features dual overhead camshafts, 4 valves per cylinder and VTEC (Honda's variable valve-timing system) on both the intake and exhaust valves. Fuel induction is via Honda's sequential, Multi-Point Programmed Fuel Injection (PGM-FI) and the ignition system is a high-voltage, computer-controlled direct type with individual spark coils for each cylinder.

The S2000 engine is 9 percent smaller and 10 percent lighter than a 2.2-liter Prelude engine, and almost as small as a 1.6-liter Civic engine. Yet this compact, lightweight engine (326 lbs.) has the highest specific power output (120 hp per liter) of any normally aspirated 2.0-liter production engine in the world. In addi-tion, the engine's exhaust emissions are so low that the S2000 qualifies as a Low-Emission Vehicle (LEV).

VTEC Variable Valve Timing

The S2000 engine uses a performance version of Honda's innovative variable valve-timing system on both the intake and exhaust valves (VTEC stands for Variable Valve-Timing and Lift Electronic Control). VTEC maximizes the S2000 engine's volumetric efficiency -- packing the maximum amount of air and fuel into the combustion chamber on each intake stroke and expelling the maximum amount of exhaust gases on the exhaust stroke.

VTEC works by varying valve timing and lift to compensate for the time delay and out-of-phase arrival of the air-fuel charge at the intake valve. Ideally, the valves should remain open for a short duration at low engine speeds and for a longer duration at high engine speeds -- and that is precisely how VTEC works.

Transmission

Honda engineers designed an entirely new close-ratio, 6-speed manual transmission for the S2000. A limited-slip differential was chosen to ensure continuous application of power to the rear wheels, especially when cornering. The transmission and entire drivetrain are designed to be highly rigid and as compact and lightweight as possible, making the vehicle more responsive to driver input and increasing the driver's enjoyment and feel for the car.

Chassis

A front-engine/rear-wheel-drive configuration was chosen for the S2000. This "classic" layout is widely regarded for its excellent handling characteristics and direct, linear response to control inputs from steering, brakes and throttle -- especially when approaching the chassis and tires' adhesion limit.

Since optimum weight distribution and balance are such important factors in achieving excellent handling characteristics, Honda engineers set the S2000's engine and drivetrain as low and close to the center of the chassis as possible. Suspension geometry -- toe, caster, camber, roll centers, etc. -- also have a tremendous effect on handling and response, so Honda engineers designed an all-new double wishbone suspension for the S2000 with optimum geometry.

Steering is by an all-new electrically assisted, power rack-and-pinion system, similar to the system used on the NSX. The braking system uses 4-wheel discs and ABS. The system has been specially engineered for optimum efficiency, feedback and control.

Interior

As with the S2000's exterior, the central design theme of the roadster's interior is performance. Honda engineers designed the interior to contribute to what they call an "interfusion" between the driver and the car.

The conceptual model for the S2000 interior is a modern Formula 1 car's cockpit. Outward visibility, simplicity of controls, control feel, comfort -- both machines have these needs in common.

Before production, the interior design was extensively tested, including wind-tunnel testing and over 20,000 miles of real-world driving in what Honda calls the maturing phase of the design. It is during this phase of development that details such as control placement, seating and driver visibility are finalized.

Ready for blastoff?

Take a deep breath, buckle up and press that bright red start button. Because the S2000 packs a 237 hp, 2.2-liter VTEC® engine, making it the most exhilarating sports car Honda has ever built. This one-of-a-kind vehicle exemplifies 40 years of Honda racing. Its DNA is that of a pure thoroughbred F1 race car, with a long lineage of Honda engineering milestones, including a victory in the 2004 and 2005 Indy 500. You don't have to take its engine up to 8000 rpm's to hear those performance genes loud and clear… although you can, just for fun. With new alloy wheels, sportier seats and a Drive-by-Wire Throttle System™, the S2000 is ready, willing and able. Are you?

OUR TAKE ON THE 2006 HONDA S2000: For its sixth year in a row, the Honda S2000 returns in its original designation. The Honda S2000 with its 240 horsepower lightweight four cyclinder engine still keeps the competition at bay. The Honda S2000 is likely to soon recieve a facelift and an engine update. The Honda S2000 completes the 2006 lineup as its only roadster.

THE HONDA S2000 COMPASS COMPETES WITH: 2006 Porsche Boxter, 2006 Pontiac Solstice, 2007 Saturn Sky, 2006 Mazda Miata

Other Honda Vehicles: 2006 Honda Civic, 2006 Honda Accord, 2006 Honda Ridgeline , 2006 Honda CBR 600 F4i

RELATED ARTICLES, REVIEWS AND SITES:


AUTO WALLPAPERS - BODY KITZ - CARBON FIBER HOODS - VERTICAL DOOR KITS - TRANCE FORM - MYSPACE LAYOUT - LEXUS IS 350